Weigh-Tronix Logo

WPI-135
     Weigh-Tronix new WPI-135 has added several distinct
enhancements to its predecessor, the WI-130 indicator. The WPI-135 system delivers improved speed and control through a faster, more powerful microprocessor. Plus, its enhanced programming functions allow the WPI-135 to replace a PLC in many control applications while being completely compatible with the entire Weigh-Tronix indicator family. The WPI-135 can be used for most weighing applications including floor, truck, track, batching, counting, check-weighing, conveyor and monorail. It’s the speed and control you need.

View Spec. Sheet Requires Adobe Acrobat Reader

WI-130 (WDAC)
Weigh-Tronix WI-130 Indicator		      The programmable WI-130 Weight Data Acquisition Controller is far more than a weight indicator. With a full spectrum of front panel configuration choices available, it displays data from standard weight sensors or can be easily upgraded to work with the Weigh-Tronix Quartzell transducer, the only true digital weight sensor. It is fully programmable. Why put up with an indicator with programming that is “pretty close” to what you need? Why change your process to fit someone else's software? The WI-130 offers you absolute freedom to create custom weighing, control and data acquisition processes and have them carried out exactly as you have defined them. 

View Spec. Sheet Requires Adobe Acrobat Reader

WI-125
Weigh-Tronix WI-125 Indicator (Lexan Enclosure)Weigh-Tronix WI-125 Indicator (Stainless Steel Enclosure)		      Available in a corrosion and washdown resistant steel NEMA 4X, or stainless steel case, the WI-125 indicator will serve you effectively in wet or dry environments. RS-232/RS-485 serial ports. Customize your printout with company name, message, character size and location, etc. right from the front panel. Provides stable readings in environments with moderately high levels of RFI radiation. The WI-125 LED's crisp easy-reading LED display will speed any weighing process.

View Spec. Sheet Requires Adobe Acrobat Reader

WI-127
Weigh-Tronix WI-127 Indicator		      The WI-127 has a highly visible, 0.8 inch high display. It features ten tare memory, ID, under / accept / over checkweighing, and a stainless steel enclosure. Seven logic level inputs for functions such as tare, print, zero, units, etc. Three cutoff outputs, open collector design. Relay power supply, 24 VDC at 150mA 5 VDC at 200mA for scanner power source. Bi-directional serial port (RS-232 or RS-422/485 or 20mA current loop).

View Spec. Sheet Requires Adobe Acrobat Reader

WI-150
Weigh-Tronix WI-150 Indicator		      The WI-150 has been tested and accepted in Factory Mutual Control Document 29274 for hazardous environments including the following locations:
  • Class I, Divisions I and II; Groups A, B, C, and D
  • Class II, Divisions I and II, Groups E, F and G
  • Class III, Divisions I and II.

     All configuration and programming is done through the front panel.

View Spec. Sheet Requires Adobe Acrobat Reader

WI-152
Weigh-Tronix WI-152 Indicator		      The WI-152 is available in two versions. The 6 volt model operates from four alkaline D-cell batteries. It has a programmable sleep mode which extends battery life to hundreds of hours. The second version operates from a 12 volt DC power source. Its power supply card provides 8 volt output and a single RS-232 serial port, real time clock, and dual cutoff outputs.

View Spec. Sheet Requires Adobe Acrobat Reader

815
Weigh-Tronix Model 815 Indicator		      Enclosed in a water resistant Lexan case, the Model 815 is perfect for farm applications such as with platform and animal scales.